CEPH环境搭建09

本节介绍如何编译ceph和nfs-ganesha源码:

1、ceph编译

git clone git://github.com/ceph/ceph
cd ceph
git checkout v15.2.3
git submodule update --init --recursive
./install-deps.sh
ARGS="-DCMAKE_BUILD_TYPE=RelWithDebInfo" ./do_cmake.sh 
cd build
make -j4
make install

2、nfs-ganesha编译

#这一段移动到“CEPH环境搭建06”去了
#只需要将版本从V3.2换成V3.3即可

3、这两个编译后,需要手工安装FSAL库

cp nfs-ganesha/build/FSAL/FSAL_CEPH/libfsalceph.so /usr/lib/x86_64-linux-gnu/ganesha/
cp nfs-ganesha/build/FSAL/FSAL_RGW/libfsalrgw.so /usr/lib/x86_64-linux-gnu/ganesha/

完全从源码编译后,用GANESHA确实可以成功挂载RGW,但是空的,而且是只读。

CEPH环境搭建08

本节主要是将rbd(也就是块存储),通过LIO映射为iscsi(也就是ip san),从而提供给其他系统使用。这种方式比fuse后再映射出来性能要好,因为fuse是要经过内核的,要做切换。

0、原本计划使用容器继续处理,但没能成功,如果你成功了麻烦告诉我一下如何做的。

#这条路没测试成功,原理上应该是一样的
ceph orch daemon add iscsi rbd --placement="1 ceph-0002"

后面是通过编译源码的方式来完成的。

1、我们在“CEPH环境搭建03”中已经建立了rbd pool,而且建立了r1,r2,r3三个存储设备

rbd ls
r1
r2
r4

2、升级linux内核

#ceph-0002
#当前内核版本比较低,会导致LIO操作失败,表现为在所以必须升级
#在gwcli做attach或create硬盘时,会报错
#Issuing disk create/update request Failed : disk create/update failed on xxx. LUN allocation failure...
#去看rbd-target-api的日志,会发现:
#Could not set LIO device attribute cmd_time_out/qfull_time_out for device: rbd/r2. Kernel not supported. - error(Cannot find attribute: qfull_time_out)
uname -a
4.15.0-91-generic x86_64 GNU/Linux

# 查看可以使用的内核版本
apt list | grep linux-generic
linux-generic/bionic-updates,bionic-security 4.15.0.101.91 amd64 [upgradable from: 4.15.0.91.83]
linux-generic-hwe-16.04/bionic-updates,bionic-security 4.15.0.101.91 amd64
linux-generic-hwe-16.04-edge/bionic-updates,bionic-security 4.15.0.101.91 amd64
linux-generic-hwe-18.04/bionic-updates,bionic-security 5.3.0.53.110 amd64
linux-generic-hwe-18.04-edge/bionic-updates,bionic-security 5.3.0.53.110 amd64

# 安装高版本内核
apt-get install linux-generic-hwe-18.04-edge

# 重启
reboot

3、编译并发布程序

#ceph-0002
#安装所需包
apt install pkg-config libglib2.0-dev librbd1 libnl-3-200 libkmod2

#python2
pip install kmod pyudev urwid pyparsing rados rbd netifaces crypto requests  flask
#缺少两个包,暂时没有影响
#pip install gobject, python-openssl

#python3
apt-get install python3-pip python3-dev python3-openssl
apt install python-dev python3-pyparsing
pip3 install gobject  pyudev urwid pyparsing netifaces crypto requests  flask
#缺少三个包,暂时没有影响
#pip3 install kmod rados rbd

#tcmu-runner
git clone https://github.com/open-iscsi/tcmu-runner
#修改脚本,extra/install_dep.sh,在debianh后增加",ubuntu",让ubuntu与debian相同处理即可
./extra/install_dep.sh
cmake -Dwith-glfs=false -Dwith-qcow=false -DSUPPORT_SYSTEMD=ON -DCMAKE_INSTALL_PREFIX=/usr
make install

#rtslib-fb
git clone https://github.com/open-iscsi/rtslib-fb.git
cd rtslib-fb
python setup.py install

#configshell-fb
git clone https://github.com/open-iscsi/configshell-fb.git
cd configshell-fb
python setup.py install

#targetcli-fb
git clone https://github.com/open-iscsi/targetcli-fb.git
cd targetcli-fb
python setup.py install
mkdir /etc/target
mkdir /var/target

#ceph-iscsi
git clone https://github.com/ceph/ceph-iscsi.git
cd ceph-iscsi
python setup.py install --install-scripts=/usr/bin
cp usr/lib/systemd/system/rbd-target-gw.service /lib/systemd/system
cp usr/lib/systemd/system/rbd-target-api.service /lib/systemd/system

#启动服务
systemctl daemon-reload
systemctl enable tcmu-runner
systemctl start tcmu-runner
systemctl enable rbd-target-gw
systemctl start rbd-target-gw
systemctl enable rbd-target-api
systemctl start rbd-target-api

4、修改配置文件

#ceph-0002
vi /etc/ceph/iscsi-gateway.cfg
[config]
# Name of the Ceph storage cluster. A suitable Ceph configuration file allowing
# access to the Ceph storage cluster from the gateway node is required, if not
# colocated on an OSD node.
cluster_name = ceph
pool = rbd
# cluster_client_name = client.igw.ceph-0002
minimum_gateways = 1
gateway_ip_list = 192.168.1.102,192.168.1.103

# Place a copy of the ceph cluster's admin keyring in the gateway's /etc/ceph
# drectory and reference the filename here
gateway_keyring = ceph.client.admin.keyring

# API settings.
# The API supports a number of options that allow you to tailor it to your
# local environment. If you want to run the API under https, you will need to
# create cert/key files that are compatible for each iSCSI gateway node, that is
# not locked to a specific node. SSL cert and key files *must* be called
# 'iscsi-gateway.crt' and 'iscsi-gateway.key' and placed in the '/etc/ceph/' directory
# on *each* gateway node. With the SSL files in place, you can use 'api_secure = true'
# to switch to https mode.

# To support the API, the bear minimum settings are:
api_secure = false

# Additional API configuration options are as follows, defaults shown.
# api_user = admin
# api_password = admin
# api_port = 5001
# trusted_ip_list = 192.168.1.101,192.168.1.102,192.168.1.103,192.168.1.104

5、将节点加入监控

#ceph-0001
ceph dashboard iscsi-gateway-list
{"gateways": {}}

ceph dashboard iscsi-gateway-add http://admin:admin@ceph-0002:5000
Success

ceph dashboard iscsi-gateway-list
{"gateways": {"localhost.vm": {"service_url": "http://admin:admin@ceph-0002:5000"}}}

# 这个localhost.vm要记住

6、配置iscsi

#ceph-0004
gwcli

# 创建gateway
> /> cd /iscsi-target
> /iscsi-target...-igw/gateways> create localhost.vm 192.168.1.102 skipchecks=true
OS version/package checks have been bypassed
Adding gateway, sync'ing 0 disk(s) and 0 client(s)
ok

> /iscsi-target...-igw/gateways> ls
o- gateways ......................... [Up: 1/1, Portals: 1]
o- localhost.vm ..................... [192.168.1.102 (UP)]

# 挂载硬盘
> /iscsi-target...-igw/gateways> cd /disks
> /disks> attach rbd/r2
ok

> /disks> ls
o- disks ............................... [1G, Disks: 1]
o- rbd ..................................... [rbd (1G)]
o- r2 ................................... [rbd/r2 (1G)]
> /disks> attach rbd/r4
ok
> /disks> ls
o- disks ............................... [2G, Disks: 2]
o- rbd ..................................... [rbd (2G)]
o- r2 ................................... [rbd/r2 (1G)]
o- r4 ................................... [rbd/r4 (1G)]

#授权管理
> /iscsi-targets> cd iqn.2020-06.com.neohope.iscsi-gw:iscsi-igw/
> /iscsi-target...-gw:iscsi-igw> ls
o- iqn.2020-06.com.neohope.iscsi-gw:iscsi-igw ...[Auth: None, Gateways: 1]
o- disks ..................................... [Disks: 0]
o- gateways ....................... [Up: 1/1, Portals: 1]
| o- localhost.vm .................. [192.168.1.102 (UP)]
o- host-groups ............................. [Groups : 0]
o- hosts .................. [Auth: ACL_ENABLED, Hosts: 0]

# 创建initiator
> /iscsi-target...-gw:iscsi-igw> cd hosts
> /iscsi-target...csi-igw/hosts> create iqn.2020-06.com.neohope:ceph-0004
ok

> /iscsi-target...ope:ceph-0004> ls
o- iqn.2020-06.com.neohope:ceph-0004 ... [Auth: None, Disks: 0(0.00Y)]

# 创建授权
> /iscsi-target...ope:ceph-0004> auth username=myissicuid password=myissicpwdpwd
ok

# 分配硬盘
> /iscsi-target...ope:ceph-0004> disk add rbd/r2
ok

> /iscsi-target...ope:ceph-0004> ls
o- iqn.2020-06.com.neohope:ceph-0004 ......... [Auth: CHAP, Disks: 1(1G)]
o- lun 0 .............................. [rbd/r2(1G), Owner: localhost.vm]

7、挂载iscsi盘

#ceph-0004

#安装需要的软件
apt-get install open-iscsi

#查看可用的iscsi服务
iscsiadm -m discovery -t sendtargets -p 192.168.1.102
192.168.1.102:3260,1 iqn.2020-06.com.neohope.iscsi-gw:iscsi-igw

#修改配置文件,initiator要和上面分配的一致
vim /etc/iscsi/initiatorname.iscsi
InitiatorName=iqn.2020-06.com.neohope:ceph-0004

#重启服务
systemctl status iscsid

#设置登录信息
iscsiadm -m node -T iqn.2020-06.com.neohope.iscsi-gw:iscsi-igw-o update --name node.session.auth.authmethod --value=CHAP
iscsiadm: No records found

iscsiadm -m node -T iqn.2020-06.com.neohope.iscsi-gw:iscsi-igw --op update --name node.session.auth.username --value=myissicuid

iscsiadm -m node -T iqn.2020-06.com.neohope.iscsi-gw:iscsi-igw --op update --name node.session.auth.password --value=myissicpwdpwd

#登录,挂载iscsi盘
iscsiadm -m node -T iqn.2020-06.com.neohope.iscsi-gw:iscsi-igw --login
Logging in to [iface: default, target: iqn.2020-06.com.neohope.iscsi-gw:iscsi-igw, portal: 192.168.1.102,3260] (multiple)
Login to [iface: default, target: iqn.2020-06.com.neohope.iscsi-gw:iscsi-igw, portal: 192.168.1.102,3260] successful.

8、使用iscsi盘

#ceph-0004

#查看硬盘,会发现多出一块
fdisk -l
Disk /dev/vda: 40 GiB, 42949672960 bytes, 83886080 sectors
Disk /dev/vdb: 20 GiB, 21474836480 bytes, 41943040 sectors
Disk /dev/mapper/ceph--44634c9f--cf41--4215--bd5b--c2db93659bf1-osd--block--b192f8e5--55f2--4e75--a7ce--54d007410829: 20 GiB, 21470642176 bytes, 41934848 sectors
Disk /dev/sda: 1 GiB, 1073741824 bytes, 2097152 sectors

#查看sda硬盘情况
fdisk -l /dev/sda
Disk /dev/sda: 1 GiB, 1073741824 bytes, 2097152 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
root@ceph-0004:/dev# fdisk -l /dev/sda
Disk /dev/sda: 1 GiB, 1073741824 bytes, 2097152 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

#格式化
sudo mkfs.ext4 -m0 /dev/sda
mke2fs 1.44.1 (24-Mar-2018)
Creating filesystem with 262144 4k blocks and 65536 inodes
Filesystem UUID: 42229c39-e23c-46b2-929d-469e66196498
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Allocating group tables: done
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done

#挂载
mount -t ext4 /dev/sda /mnt/iscsi

#基本操作
cd /mnt/iscsi/
ls
vi iscis.txt
ls

9、卸载iscsi盘

#ceph-0004

#取消mount
umount /mnt/iscsi

#登出
iscsiadm -m node -T iqn.2020-06.com.neohope.iscsi-gw:iscsi-igw  --logout
Logging out of session [sid: 1, target: iqn.2020-06.com.neohope.iscsi-gw:iscsi-igw, portal: 192.168.1.102,3260]
Logout of [sid: 1, target: iqn.2020-06.com.neohope.iscsi-gw:iscsi-igw, portal: 192.168.1.102,3260] successful.

#查看硬盘列表,会发现iscsi盘已经不见了
fdisk -l

CEPH环境搭建07

本节主要是将rbd(也就是块存储),通过tgt映射为iscsi(也就是ip san),从而提供给其他系统使用。

1、安装需要的软件

#ceph-0002
apt-get install tgt
apt-get install open-iscsi

2、查看tgt对rbd的支持情况

#ceph-0002
tgtadm --lld iscsi --op show --mode system
System:
  State: ready
  debug: off
LLDs:
  iscsi: ready
  iser: error
  Backing stores:
  sheepdog
  bsg
  sg
  null
  ssc
  smc (bsoflags sync:direct)
  mmc (bsoflags sync:direct)
  rdwr (bsoflags sync:direct)
  aio
Device types:
  disk
  cd/dvd
  osd
  controller
  changer
  tape
  passthrough
iSNS:
  iSNS=Off
  iSNSServerIP=
  iSNSServerPort=3205
  iSNSAccessControl=Off

可见当前版本的tgt不支持直接使用rbd,所以要先将rbd映射为硬盘后,再进行处理。

3、创建并映射rbd设备

#ceph-0002
#创建块存储
rbd create --size 1024 rbd/r2

#禁用特性
rbd feature disable r2 object-map fast-diff deep-flatten

#映射r2设备
rbd map r2
/dev/rbd0

#查看映射情况
rbd showmapped
id pool image snap device
0  rbd  r2    -    /dev/rbd0

4、修改tgt配置文件

#ceph-0002
vim /etc/tgt/targets.conf
<target iqn.2020-06.com.neohope:iscsi="">
  backing-store  /dev/rbd0             #虚拟设备
  initiator-address 192.168.1.0/24     #IP限制,请根据实际需要配置
  # incominguser iuid ipwd             #授权限制,请根据实际需要配置
  write-cache off                      #关闭缓存,请根据实际需要配置
</target>

# 重启服务,配置生效
systemctl restart tgt.service

# 查看tgt情况
tgt-admin –-show
Target 1: iqn.2020-06.com.neohope:iscsi
System information:
  Driver: iscsi
  State: ready
I_T nexus information:
LUN information:
  LUN: 0
    Type: controller
    SCSI ID: IET     00010000
    SCSI SN: beaf10
    Size: 0 MB, Block size: 1
    Online: Yes
    Removable media: No
    Prevent removal: No
    Readonly: No
    SWP: No
    Thin-provisioning: No
    Backing store type: null
    Backing store path: None
    Backing store flags:
  LUN: 1
    Type: disk
    SCSI ID: IET     00010001
    SCSI SN: beaf11
    Size: 1074 MB, Block size: 512
    Online: Yes
    Removable media: No
    Prevent removal: No
    Readonly: No
    SWP: No
    Thin-provisioning: No
    Backing store type: rdwr
    Backing store path: /dev/rbd0
    Backing store flags:
Account information:
ACL information:
  192.168.1.0/24

5、挂载iscsi盘

#ceph-0004
#安装需要的软件
apt-get install open-iscsi

#查看可用的iscsi服务
iscsiadm -m discovery -t sendtargets -p 192.168.1.102:3260
192.168.1.102:3260,1 iqn.2020-06.com.neohope:iscsi

#登录,挂载iscsi盘
iscsiadm -m node -T iqn.2020-06.com.neohope:iscsi --login
Logging in to [iface: default, target: iqn.2020-06.com.neohope:iscsi, portal: 192.168.1.102,3260] (multiple)
Login to [iface: default, target: iqn.2020-06.com.neohope:iscsi, portal: 192.168.1.102,3260] successful.

6、使用iscsi盘

#ceph-0004

#查看硬盘,会发现多出一块
fdisk -l
Disk /dev/vda: 40 GiB, 42949672960 bytes, 83886080 sectors
Disk /dev/vdb: 20 GiB, 21474836480 bytes, 41943040 sectors
Disk /dev/mapper/ceph--44634c9f--cf41--4215--bd5b--c2db93659bf1-osd--block--b192f8e5--55f2--4e75--a7ce--54d007410829: 20 GiB, 21470642176 bytes, 41934848 sectors
Disk /dev/sda: 1 GiB, 1073741824 bytes, 2097152 sectors

#查看sda硬盘情况
fdisk -l /dev/sda
Disk /dev/sda: 1 GiB, 1073741824 bytes, 2097152 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
root@ceph-0004:/dev# fdisk -l /dev/sda
Disk /dev/sda: 1 GiB, 1073741824 bytes, 2097152 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

#格式化
sudo mkfs.ext4 -m0 /dev/sda
mke2fs 1.44.1 (24-Mar-2018)
Creating filesystem with 262144 4k blocks and 65536 inodes
Filesystem UUID: 42229c39-e23c-46b2-929d-469e66196498
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Allocating group tables: done
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done

#挂载
mount -t ext4 /dev/sda /mnt/iscsi

#基本操作
cd /mnt/iscsi/
ls
vi iscis.txt
ls

7、卸载iscsi盘

#取消mount
umount /mnt/iscsi

#登出
iscsiadm -m node -T iqn.2020-06.com.neohope:iscsi  --logout
Logging out of session [sid: 1, target: iqn.2020-06.com.neohope:iscsi, portal: 192.168.1.102,3260]
Logout of [sid: 1, target: iqn.2020-06.com.neohope:iscsi, portal: 192.168.1.102,3260] successful.

#查看硬盘列表,会发现iscsi盘已经不见了
fdisk -l

CEPH环境搭建06

本节主要是使用ganesha将cephfs和rgw,映射为nfs,从而提供给其他系统使用。

0、原本计划使用容器继续处理,但没能成功,如果你成功了麻烦告诉我一下如何做的。

#这条路没测试成功,原理上应该是一样的
ceph orch apply nfs mynfs nfspool --placement="1 ceph-0003"

后面是通过编译源码的方式来完成的,操作系统是Ubuntu18.0.4,由于没有高版本的librgw的开发库(Ubuntu18.0.4只有1.1.6,而ganesha却要1.1.7以上),所以最后没能支持rgw,只能支持cephfs:

1、安装所需包

#ceph-0003
apt-get install gcc git cmake autoconf libtool bison flex
apt-get install libssl-dev  libnfs-dev doxygen libgssglue-dev libkrb5-dev liburcu-dev libntirpc-dev
apt-get install libnfsidmap-dev uuid-dev libblkid-dev
apt-get install librados-dev librgw-dev libcephfs-dev nfs-ganesha-ceph
snap install cmake  --classic
#缺少libzardfs_client,webclient,暂时没有影响

2、下载源码

#ceph-0003
git clone https://github.com/nfs-ganesha/nfs-ganesha.git
cd nfs-ganesha
git checkout V3.2
git submodule update --init --recursive

3、编译

#ceph-0003
mkdir build
cd build

#这里要把rgw的自持去掉,否则无法通过
ccmake ../src
>config
>generate

make
make install

4、创建ganesha配置文件

# ceph-0003
# 配置文件是支持cephfs和rgw的
vi /etc/ganesha/ganesha.conf
NFS_CORE_PARAM {
        Enable_NLM = false;
        Enable_RQUOTA = false;
        Protocols = 4;
        NFS_Port = 2049;
}

NFSv4 {
        Delegations = false;
        Minor_Versions = 1, 2;
}

CACHEINODE {
        Dir_Chunk = 0;
        NParts = 1;
        Cache_Size = 1;
}

EXPORT_DEFAULTS {
        Attr_Expiration_Time = 0;
}

EXPORT {
    Export_ID = 1001;
    Protocols = 3,4;
    Path = /;
    Pseudo = /cephfs;
    Access_Type = RW;
    #Transport_Protocols = TCP;
    Squash = Root_squash;
    FSAL {
        Name = CEPH;
    }
}

EXPORT
{
    Export_ID=1002;
    NFS_Protocols = 3,4;
    Path = "/";
    Pseudo = /rgw;
    Access_Type = RW;
    #Transport_Protocols = TCP;
    Squash = Root_squash;

    FSAL {
        Name = RGW;
        User_Id = "s3user";
        Access_Key_Id ="J5IWQUN50UJHVH48461Q";
        Secret_Access_Key = "5fgLtqd07EI6LS3PamPVNBpqwPPfPYJNxULBlgpj";
    }
}

LOG {
    Facility {
        name = FILE;
        destination = "/var/log/ganesha/ganesha.log";
        enable = active;
    }
}

CEPH {
    ceph_conf = '/etc/ceph/ceph.conf';
    cluster = "ceph";
    name = "rgw.myrealm.myzone";
}

RGW {
    ceph_conf = "/etc/ceph/ceph.conf";
}

5、运行ganesha

ganesha.nfsd -f /etc/ganesha/ganesha.conf -L /var/log/ganesha/ganesha.log -N NIV_INFO

6、挂载

#ceph-0004
mount -t nfs4 ceph-0003:/cephfs  /mnt/nfs/

ls /mnt/nfs
fuse.txt  volumes

cat /mnt/nfs/fuse.txt
fuse

ls /mnt/nfs/volumes/
subvg01  subvg02

7、取消挂载

#ceph-0004
umount /mnt/nfs

8、补充:
前面傻了,只用了ubuntu的源,忘记使用ceph的源了。其实用ceph的源后,就可以解决问题了,操作和上面相同,编译方式如下:

#添加ceph源
wget -q -O- 'https://download.ceph.com/keys/release.asc' | sudo apt-key add -
sudo apt-add-repository 'deb https://download.ceph.com/debian-octopus/ bionic main'
sudo apt-get update

#安装需要的软件
apt-get install gcc git cmake autoconf libtool bison flex
apt-get install libssl-dev  libnfs-dev doxygen libgssglue-dev libkrb5-dev liburcu-dev libntirpc-dev
apt-get install libnfsidmap-dev uuid-dev libblkid-dev
apt-get install librados-dev librgw-dev libcephfs-dev nfs-ganesha-ceph
snap install cmake  --classic
#缺少libzardfs_client,webclient,暂时没有影响

#下载源码并编译
git clone https://github.com/nfs-ganesha/nfs-ganesha.git
git checkout V3.2
git submodule update --init --recursive

mkdir build
cd build
ccmake ../src

make
make install

CEPH环境搭建05

本节主要是使用nfs-kernel-server将cephfs或rbd映射为nfs。

1、安装nfs相关软件

apt-get install nfs-kernel-server
apt-get install nfs-common

2、在ceph-0001挂载好fuse和rbd

ceph-fuse /mnt/fuse
rbd map r1
mount -t ext4 /dev/rbd0 /mnt/rbd

3、配置exports文件

vi /etc/exports
/mnt/fuse         192.168.1.0/24(rw,sync,no_root_squash,no_subtree_check,fsid=0)
/mnt/rbd          192.168.1.0/24(rw,sync,no_root_squash,no_subtree_check)

4、更新配置

exportfs -a

systemctl restart nfs-kernel-server

showmount -e
Export list for ceph-0001:
/mnt/rbd  192.168.1.0/24
/mnt/fuse 192.168.1.0/24

5、到另一台机器进行挂载

mount -t nfs  ceph-0001:/mnt/fuse  /mnt/fuse --verbose
mount.nfs: timeout set for Fri Jun  5 19:06:27 2020
mount.nfs: trying text-based options 'vers=4.2,addr=192.168.1.101,clientaddr=192.168.1.103'
mount.nfs: mount(2): No such file or directory
mount.nfs: trying text-based options 'addr=192.168.1.101'
mount.nfs: prog 100003, trying vers=3, prot=6
mount.nfs: trying 192.168.1.101 prog 100003 vers 3 prot TCP port 2049
mount.nfs: prog 100005, trying vers=3, prot=17
mount.nfs: trying 192.168.1.101 prog 100005 vers 3 prot UDP port 39630

mount -t nfs  ceph-0001:/mnt/rbd  /mnt/rbd --verbose
mount.nfs: timeout set for Fri Jun  5 19:06:36 2020
mount.nfs: trying text-based options 'vers=4.2,addr=192.168.1.101,clientaddr=192.168.1.103'
mount.nfs: mount(2): No such file or directory
mount.nfs: trying text-based options 'addr=192.168.1.101'
mount.nfs: prog 100003, trying vers=3, prot=6
mount.nfs: trying 192.168.1.101 prog 100003 vers 3 prot TCP port 2049
mount.nfs: prog 100005, trying vers=3, prot=17
mount.nfs: trying 192.168.1.101 prog 100005 vers 3 prot UDP port 39630

ls /mnt/fuse
fuse.txt  volumes

ls /mnt/rbd
lost+found  rbd1.txt

CEPH环境搭建04

本节主要是测试ceph的三种存储方式之一对象存储。

1、创建zone,并开启rgw

#创建realm
radosgw-admin realm create --rgw-realm=myrealm --default
#创建zonegroup
radosgw-admin zonegroup create --rgw-zonegroup=myzg --endpoints=http://ceph01:8080 --rgw-realm=myrealm --master --default
#创建zone
radosgw-admin zone create --rgw-zonegroup=myzg --rgw-zone=myzone --endpoints=http://ceph01:8080 --master --default
# 在ceph01启用rgw
ceph orch apply rgw myrealm myzone --placement="1 ceph01"

2、创建s3用户

radosgw-admin user create --uid=s3user --display-name=s3user  --system
{
  "user_id": "s3user",
  "display_name": "s3user",
  "email": "",
  "suspended": 0,
  "max_buckets": 1000,
  "auid": 0,
  "subusers": [],
  "keys": [
    {
      "user": "s3user",
      "access_key": "6IUA1DMFDTP5BG9ZMIR8",
      "secret_key": "zdoRS2yWL6EsNEBa4xuOSFMPn0lMvPJVMIYZJirP"
    }
  ],
  "swift_keys": [],
  "caps": [],
  "op_mask": "read, write, delete",
  "system": "true",
  "default_placement": "",
  "placement_tags": [],
  "bucket_quota": {
    "enabled": false,
    "check_on_raw": false,
    "max_size": -1,
    "max_size_kb": 0,
    "max_objects": -1
  },
  "user_quota": {
    "enabled": false,
    "check_on_raw": false,
    "max_size": -1,
    "max_size_kb": 0,
    "max_objects": -1
  },
  "temp_url_keys": [],
  "type": "rgw"
}

3、创建swift用户

sudo radosgw-admin subuser create --uid=s3user --subuser=s3user:swift --access=full
{
  "user_id": "s3user",
  "display_name": "s3user",
  "email": "",
  "suspended": 0,
  "max_buckets": 1000,
  "auid": 0,
  "subusers": [
    {
      "id": "s3user:swift",
      "permissions": "full-control"
    }
  ],
  "keys": [
    {
      "user": "s3user",
      "access_key": "6IUA1DMFDTP5BG9ZMIR8",
      "secret_key": "zdoRS2yWL6EsNEBa4xuOSFMPn0lMvPJVMIYZJirP"
    }
  ],
  "swift_keys": [
    {
      "user": "s3user:swift",
      "secret_key": "2wou5DxQ6WiBYyHf8qb3QIMX9BnhhBd5Njlj6LJX"
    }
  ],
  "caps": [],
  "op_mask": "read, write, delete",
  "system": "true",
  "default_placement": "",
  "placement_tags": [],
  "bucket_quota": {
    "enabled": false,
    "check_on_raw": false,
    "max_size": -1,
    "max_size_kb": 0,
    "max_objects": -1
  },
  "user_quota": {
    "enabled": false,
    "check_on_raw": false,
    "max_size": -1,
    "max_size_kb": 0,
    "max_objects": -1
  },
  "temp_url_keys": [],
  "type": "rgw"
}

4、通过s3接口新增一个bucket

sudo apt-get install python-boto

# 编辑s3test.py文件
vi s3test.py

import boto.s3.connection

access_key = '6IUA1DMFDTP5BG9ZMIR8'
secret_key = 'zdoRS2yWL6EsNEBa4xuOSFMPn0lMvPJVMIYZJirP'

conn = boto.connect_s3(
  aws_access_key_id=access_key,
  aws_secret_access_key=secret_key,
  host='ceph01', port=80,
  is_secure=False, calling_format=boto.s3.connection.OrdinaryCallingFormat(),
  )

bucket = conn.create_bucket('my-new-bucket')
for bucket in conn.get_all_buckets():
  print "{name} {created}".format(
    name=bucket.name,
    created=bucket.creation_date,
    )

#运行
python s3test.py
mybucket 2020-05-19T20:01:59.139Z

5、通过swift接口查询bucket

sudo apt-get install python-pip
sudo pip install --upgrade setuptools
sudo pip install --upgrade python-swiftclient

# 用swift工具查询bucket
swift -V 1 -A http://172.16.172.101:80/auth -U s3user:swift -K '2wou5DxQ6WiBYyHf8qb3QIMX9BnhhBd5Njlj6LJX' list
mybucket

5、通过s3cmd接口查询bucket

sudo apt-get install s3cmd

#生成配置
s3cmd --configure

#用s3cmd工具查询bucket
s3cmd ls
2020-05-19 20:01  s3://mybucket

CEPH环境搭建03

本节主要是测试ceph的三种存储方式之一块存储。

1、创建存储池以及rbd

sudo ceph osd pool ls
sudo ceph osd pool create rbd

sudo rados df

sudo rbd ls
sudo rbd create --size 1024 rbd/r1

2、将映像映射到块设备

#直接映射会报一个错
#sudo rbd map r1
#rbd: sysfs write failed
#RBD image feature set mismatch. You can disable features unsupported by the kernel with "rbd feature disable r1 object-map fast-diff deep-flatten".
#In some cases useful info is found in syslog - try "dmesg | tail".
#rbd: map failed: (6) No such device or address

#修正错误,重新映射
sudo rbd feature disable r1 object-map fast-diff deep-flatten
sudo rbd map r1
/dev/rbd0

#查看映射情况
sudo rbd showmapped
id pool image snap device
0  rbd  r1    -    /dev/rbd0

3、初始化块设备

#fdis初始化设备
sudo fdisk -l /dev/rbd0

#格式化分区为ext4
sudo mkfs.ext4 -m0 /dev/rbd0

#挂载块设备
sudo mkdir -p /mnt/rbd/r1
sudo mount -t ext4 /dev/rbd0 /mnt/rbd/r1

4、进行一些基本操作

sudo ls /mnt/rbd/r1

sudo vi /mnt/rbd/r1/hi.txt

sudo cat /mnt/rbd/r1/hi.txt
hello rbd

CEPH环境搭建02

本节主要是将存储设备加入ceph进行管理,并测试ceph的三种存储方式之一cephfs。

1、查看设备状态

sudo ceph osd status
ID  HOST     USED  AVAIL  WR OPS  WR DATA  RD OPS  RD DATA  STATE
0  ceph01  1027M   298G      0        0       0        0   exists,up
1  ceph02  1027M   298G      0        0       0        0   exists,up
2  ceph03  1027M   298G      0        0       0        0   exists,up
3  ceph04  1027M   298G      0        0       0        0   exists,up

sudo ceph orch device ls
HOST    PATH      TYPE   SIZE  DEVICE                             AVAIL  REJECT REASONS
ceph01  /dev/sdb  hdd    300G  VBOX_HARDDISK_VB434b1565-528a303a  True
ceph01  /dev/sda  hdd    300G  VBOX_HARDDISK_VB3eec2162-9aed4ffc  False  locked
ceph02  /dev/sdb  hdd    300G  VBOX_HARDDISK_VBa6445865-c497aa8e  True
ceph02  /dev/sda  hdd    300G  VBOX_HARDDISK_VB64e04201-60c7209f  False  locked
ceph03  /dev/sdb  hdd    300G  VBOX_HARDDISK_VB20fd0c04-b14ef3fa  True
ceph03  /dev/sda  hdd    300G  VBOX_HARDDISK_VB6f4439ab-85f80c78  False  locked
ceph04  /dev/sdb  hdd    300G  VBOX_HARDDISK_VB2c293541-3183e992  True
ceph04  /dev/sda  hdd    300G  VBOX_HARDDISK_VBd81d45d4-a88d6ff3  False  locked

2、存储设备加入osd管理

sudo ceph orch apply osd --all-available-devices
Scheduled osd update...

sudo ceph orch device ls --refresh
HOST    PATH      TYPE   SIZE  DEVICE                             AVAIL  REJECT REASONS
ceph01  /dev/sda  hdd    300G  VBOX_HARDDISK_VB3eec2162-9aed4ffc  False  locked
ceph01  /dev/sdb  hdd    300G  VBOX HARDDISK_VB434b1565-528a303a  False  LVM detected, Insufficient space (&amp;amp;lt;5GB) on vgs, locked
ceph02  /dev/sda  hdd    300G  VBOX_HARDDISK_VB64e04201-60c7209f  False  locked
ceph02  /dev/sdb  hdd    300G  VBOX HARDDISK_VBa6445865-c497aa8e  False  LVM detected, locked, Insufficient space (&amp;amp;lt;5GB) on vgs
ceph03  /dev/sda  hdd    300G  VBOX_HARDDISK_VB6f4439ab-85f80c78  False  locked
ceph03  /dev/sdb  hdd    300G  VBOX HARDDISK_VB20fd0c04-b14ef3fa  False  locked, Insufficient space (&amp;amp;lt;5GB) on vgs, LVM detected
ceph04  /dev/sda  hdd    300G  VBOX_HARDDISK_VBd81d45d4-a88d6ff3  False  locked
ceph04  /dev/sdb  hdd    300G  VBOX HARDDISK_VB2c293541-3183e992  False  LVM detected, locked, Insufficient space (&amp;amp;lt;5GB) on vgs

3、查看osd状态

sudo ceph osd df
ID  CLASS  WEIGHT   REWEIGHT  SIZE     RAW USE  DATA     OMAP  META   AVAIL    %USE  VAR   PGS  STATUS
0    hdd  0.29300   1.00000  300 GiB  1.0 GiB  3.4 MiB   0 B  1 GiB  299 GiB  0.33  1.00    0      up
1    hdd  0.29300   1.00000  300 GiB  1.0 GiB  3.4 MiB   0 B  1 GiB  299 GiB  0.33  1.00    1      up
2    hdd  0.29300   1.00000  300 GiB  1.0 GiB  3.4 MiB   0 B  1 GiB  299 GiB  0.33  1.00    1      up
3    hdd  0.29300   1.00000  300 GiB  1.0 GiB  3.4 MiB   0 B  1 GiB  299 GiB  0.33  1.00    1      up
TOTAL  1.2 TiB  4.0 GiB   14 MiB   0 B  4 GiB  1.2 TiB  0.33
MIN/MAX VAR: 1.00/1.00  STDDEV: 0

sudo ceph osd utilization
avg 0.75
stddev 0.433013 (expected baseline 0.75)
min osd.0 with 0 pgs (0 * mean)
max osd.1 with 1 pgs (1.33333 * mean)
neohope@ceph01:~$ sudo ceph osd pool stats
pool device_health_metrics id 1
nothing is going on

sudo ceph osd tree
ID  CLASS  WEIGHT   TYPE NAME        STATUS  REWEIGHT  PRI-AFF
-1         1.17200  root default
-3         0.29300      host ceph01
0    hdd  0.29300          osd.0        up   1.00000  1.00000
-5         0.29300      host ceph02
1    hdd  0.29300          osd.1        up   1.00000  1.00000
-7         0.29300      host ceph03
2    hdd  0.29300          osd.2        up   1.00000  1.00000
-9         0.29300      host ceph04
3    hdd  0.29300          osd.3        up   1.00000  1.00000

sudo ceph pg stat
1 pgs: 1 active+clean; 0 B data, 14 MiB used, 1.2 TiB / 1.2 TiB avail

4、创建cephfs

sudo ceph fs volume ls
[]
sudo ceph fs volume create  v1
sudo ceph fs volume ls
[
{
"name": "v1"
}
]

sudo ceph fs subvolumegroup create v1 g1
sudo ceph fs subvolumegroup ls v1

sudo ceph fs subvolume create v1 sv1
sudo ceph fs subvolume ls v1

sudo ceph fs ls
name: v1, metadata pool: cephfs.v1.meta, data pools: [cephfs.v1.data ]

5、挂载cephfs

sudo apt-get install ceph-fuse

# 挂载cephfs
sudo mkdir -p /mnt/ceph/ceph_fuse
sudo ceph-fuse /mnt/ceph/ceph_fuse
ceph-fuse[24512]: starting ceph client
2020-05-18 05:57:36.039818 7f7d221a2500 -1 init, newargv = 0x559708e0e2e0 newarg                                                                                                             c=9
ceph-fuse[24512]: starting fuse

# 查看挂载情况
sudo mount | grep ceph
ceph-fuse on /mnt/ceph/ceph_fuse type fuse.ceph-fuse (rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other)

# 可以当作本地磁盘做一些日常操作
sudo ls /mnt/ceph/ceph_fuse/
volumes
sudo ls /mnt/ceph/ceph_fuse/volumes
g1  _nogroup
sudo ls /mnt/ceph/ceph_fuse/volumes/g1

sudo vi /mnt/ceph/ceph_fuse/volumes/g1/hi.txt
sudo cat /mnt/ceph/ceph_fuse/volumes/g1/hi.txt
hello ceph fuse

CEPH环境搭建01

1、初始环境

准备四个节点(每个节点的hosts和hostname要进行相应修改):

ceph-0001 172.16.172.101
ceph-0002 172.16.172.102
ceph-0003 172.16.172.103
ceph-0004 172.16.172.104

每个节点都执行:

sudo apt-get update
sudo apt-get install docker.io

2、在主节点安装cephadm

#官方推荐的方法有问题
#sudo ./cephadm add-repo --release octopus
#The key(s) in the keyring /etc/apt/trusted.gpg.d/ceph.release.gpg are ignored as the file has an unsupported filetype.
#sudo rm /etc/apt/trusted.gpg.d/ceph.release.gpg

wget -q -O- 'https://download.ceph.com/keys/release.asc' | sudo apt-key add -
echo deb http://download.ceph.com/debian-octopus/ $(lsb_release -sc) main | sudo tee /etc/apt/sources.list.d/ceph.list
sudo apt-get update

curl --silent --remote-name --location https://github.com/ceph/ceph/raw/octopus/src/cephadm/cephadm
chmod 711 cephadm
sudo ./cephadm install

sudo cephadm install ceph-common

3、初始化

sudo mkdir -p /etc/ceph

sudo cephadm bootstrap --mon-ip 172.16.172.101 --allow-overwrite
INFO:cephadm:Verifying podman|docker is present...
INFO:cephadm:Verifying lvm2 is present...
INFO:cephadm:Verifying time synchronization is in place...
INFO:cephadm:Unit systemd-timesyncd.service is enabled and running
INFO:cephadm:Repeating the final host check...
INFO:cephadm:podman|docker (/usr/bin/docker) is present
INFO:cephadm:systemctl is present
INFO:cephadm:lvcreate is present
INFO:cephadm:Unit systemd-timesyncd.service is enabled and running
INFO:cephadm:Host looks OK
INFO:root:Cluster fsid: 7bffaaf6-9688-11ea-ac24-080027b4217f
INFO:cephadm:Verifying IP 172.16.172.101 port 3300 ...
INFO:cephadm:Verifying IP 172.16.172.101 port 6789 ...
INFO:cephadm:Mon IP 172.16.172.101 is in CIDR network 172.16.172.0/24
INFO:cephadm:Pulling latest docker.io/ceph/ceph:v15 container...
INFO:cephadm:Extracting ceph user uid/gid from container image...
INFO:cephadm:Creating initial keys...
INFO:cephadm:Creating initial monmap...
INFO:cephadm:Creating mon...
INFO:cephadm:Waiting for mon to start...
INFO:cephadm:Waiting for mon...
INFO:cephadm:Assimilating anything we can from ceph.conf...
INFO:cephadm:Generating new minimal ceph.conf...
INFO:cephadm:Restarting the monitor...
INFO:cephadm:Setting mon public_network...
INFO:cephadm:Creating mgr...
INFO:cephadm:Wrote keyring to /etc/ceph/ceph.client.admin.keyring
INFO:cephadm:Wrote config to /etc/ceph/ceph.conf
INFO:cephadm:Waiting for mgr to start...
INFO:cephadm:Waiting for mgr...
INFO:cephadm:mgr not available, waiting (1/10)...
INFO:cephadm:mgr not available, waiting (2/10)...
INFO:cephadm:mgr not available, waiting (3/10)...
INFO:cephadm:Enabling cephadm module...
INFO:cephadm:Waiting for the mgr to restart...
INFO:cephadm:Waiting for Mgr epoch 5...
INFO:cephadm:Setting orchestrator backend to cephadm...
INFO:cephadm:Generating ssh key...
INFO:cephadm:Wrote public SSH key to to /etc/ceph/ceph.pub
INFO:cephadm:Adding key to root@localhost's authorized_keys...
INFO:cephadm:Adding host ceph01...
INFO:cephadm:Deploying mon service with default placement...
INFO:cephadm:Deploying mgr service with default placement...
INFO:cephadm:Deploying crash service with default placement...
INFO:cephadm:Enabling mgr prometheus module...
INFO:cephadm:Deploying prometheus service with default placement...
INFO:cephadm:Deploying grafana service with default placement...
INFO:cephadm:Deploying node-exporter service with default placement...
INFO:cephadm:Deploying alertmanager service with default placement...
INFO:cephadm:Enabling the dashboard module...
INFO:cephadm:Waiting for the mgr to restart...
INFO:cephadm:Waiting for Mgr epoch 13...
INFO:cephadm:Generating a dashboard self-signed certificate...
INFO:cephadm:Creating initial admin user...
INFO:cephadm:Fetching dashboard port number...
INFO:cephadm:Ceph Dashboard is now available at:

URL: https://localhost:8443/
User: admin
Password: mdbewc14gq

INFO:cephadm:You can access the Ceph CLI with:

sudo /usr/sbin/cephadm shell --fsid 7bffaaf6-9688-11ea-ac24-080027b4217f -c /etc/ceph/ceph.conf -k /etc/ceph/ceph.client.admin.keyring

INFO:cephadm:Please consider enabling telemetry to help improve Ceph:

ceph telemetry on

For more information see:

https://docs.ceph.com/docs/master/mgr/telemetry/

INFO:cephadm:Bootstrap complete.

4、此时可以通过最后给出的信息,登录管理页面了

5、修改配置文件

sudo vi /etc/ceph/ceph.conf

[global]
fsid = a4547d9d-f1a1-4753-b5cc-df0e043ebc65
mon_initial_members = ceph01
#原本生成的mon_host好像有些问题
#mon_host = [v2:ceph01:3300/0,v1:ceph:6789/0]
mon_host = 172.16.172.101
auth_cluster_required = cephx
auth_service_required = cephx
auth_client_required = cephx
public_network = 172.16.172.0/24

6、查看ceph状态

sudo ceph status
cluster:
id:     7bffaaf6-9688-11ea-ac24-080027b4217f
health: HEALTH_WARN
Reduced data availability: 1 pg inactive
OSD count 0 &amp;amp;amp;amp;amp;lt; osd_pool_default_size 3

services:
mon: 1 daemons, quorum ceph01 (age 35m)
mgr: ceph01.lreqdw(active, since 33m)
osd: 0 osds: 0 up, 0 in

data:
pools:   1 pools, 1 pgs
objects: 0 objects, 0 B
usage:   0 B used, 0 B / 0 B avail
pgs:     100.000% pgs unknown
1 unknown

7、三个子节点做好准备

#在ceph01
#将ceph.pub拷贝到其他三个节点
scp /etc/ceph/ceph.pub  neohope@ceph02:~/authorized_keys

#在ceph02
#启用root
sudo passwd -u root
#设置好root的authorized_keys
mv authorized_keys  /root/.ssh/
cd /root/.ssh/
chown root:root authorized_keys
chmod 0600 authorized_keys
#允许root ssh登录
sudo sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/' /etc/ssh/sshd_config
sudo service ssh restart

#在ceph01
#获取私钥
sudo ceph config-key get mgr/cephadm/ssh_identity_key &amp;amp;amp;amp;amp;gt; ceph.pem
chmod 0600 ceph.pem
#测试root登录
ssh  -i ceph.pem root@ceph02

8、三个子节点加入网络

sudo ceph orch host add ceph02
Added host 'ceph02'

sudo ceph orch host add ceph03
Added host 'ceph03'

sudo ceph orch host add ceph04
Added host 'ceph04'

sudo ceph orch host ls
HOST    ADDR    LABELS  STATUS
ceph01  ceph01
ceph02  ceph02
ceph03  ceph03
ceph04  ceph04

9、设置mon

ceph orch apply mon 4
ceph orch apply mon ceph01,ceph02,ceph03,ceph04
sudo ceph status

OpenStack搭建私有云10

本节介绍对象存储的基本操作,仅在CT01进行操作

. user01-openrc
#查看状态
swift stat
#新建container
openstack container create container01
#文件上传
openstack object create container01 hi.txt
#文件ls
openstack object list container01
#查看文件信息
openstack object show container01 hi.txt
#设置tag
openstack object set --property owner=neohope container01 hi.txt
#查看文件信息
openstack object show container01 hi.txt
#取消tag
openstack object unset --property owner container01 hi.txt
#查看文件信息
openstack object show container01 hi.txt
#取回文件
mv hi.txt hi.txt.bak
openstack object save container01 hi.txt
#删除文件
openstack object delete container01 hi.txt

PS:
如果遇到权限问题,可以尝试将/srv/node安全级别降到最低

#chcon -R system_u:object_r:swift_data_t:s0 /srv/node